12 DIY Teacher Gifts to Earn You an A+

1. Heart-shaped jewelry

Now don’t get me wrong – heart-shaped jewelry can be super cute, but oftentimes, it can feel a little cheesy and predictable for Valentine’s Day.

2. Huge teddy bears

Those big teddies – or even just the cheap stuffed animals from the drugstore – are not practical whatsoever and tend to collect dust. Unless you know of a very specific plush that your Valentine's been wanting, it’s okay to skip the stuffed animals.

3. A dozen roses

While red roses can be a romantic gesture, there are so many other flowers to consider. Roses are simply generic AF and very expected – instead, get to the bottom of what your Valentine’s favorite flower is and run with that! From lilies to mums, you could even create your own bouquet with just a little extra effort.

4. Fake plants

The same idea goes for fake plants. Why invest in a fake plant when a real one can be so much more meaningful? This way, every time your Valentine goes to water the plant you gave them, they’ll be thinking of you. ❤️

5. Matching gifts

Matching t-shirts, mugs, socks, and the like are honestly pretty cringeworthy, unless you’re really into them. Your Valentine will definitely appreciate a unique gift a lot more this year.

6. Cheap chocolates

Cheap chocolates are good for a last-minute gift, but if you want your gift to feel special to your Valentine, please take the extra time (and money!) to opt for a fancier box. They’ll look better and taste better.

7. Anything impersonal

All of this goes to say that anything impersonal makes a cliche and outdated Valentine’s Day gift. You don’t even have to go insanely above and beyond for your date this year – just a little extra consideration will definitely make them feel loved.

Supplies For Your Own "Cruel Summer" Taylor Swift Fuzzy Dice:

• Sewing machine
• Pink fleece fabric
• Pink thread
• Pink felt
• Scissors
• Blue rope/cord (I took mine off a loofah)
• Needle + pins
• A copy of Lover to listen to while you sew ;)
• Poly-Fil Stuffing (not pictured)
• Ruler (optional)
• Glue gun + glue gun sticks (optional, use it to touch up your seams if you need)

Instructions:

Start by marking your fleece with the measurements for your squares. Since the size of the dice on Taylor's official website was listed as 3.5", I marked them just above 3.5" so I could leave room for a hem. You'll need 12 squares total.

Next, cut out your squares. I used the first square as a template for the others, then went back in and cleaned up the edges where necessary.

The first image I made was a sun, and I started by drawing a circle on my felt. I used the rim of my thread spool to make sure I had a perfect circle but you can also free hand if you want the circle to be a different size.

Pin your felt to the center of a fleece square.

Sew the circle to the fleece using a regular straight stitch.

Next, move your sewing machine from a straight stitch to a zigzag stitch and decrease your stitch length to a lower number like 0 or 1. This will allow your art to have more of a filled-in border, instead of a messier, chevron finish.

Go back over the rim of your circle with the zigzag stitch to give it that embroidered look. I did this with the fabric right side up, then I did it again with the fabric flipped upside down just to be extra thorough.

After your circle is complete, it's time for the sun rays! Use the same zigzag stitch and 0 stitch length to move from the circle outward. This is where you'll want to add another element: stitch width.

To give the sun rays their triangular shape, adjust your stitch width as you move out from the heart of the sun. While the stitch length ensures your sewing won't have empty spaces, the width will let you move from a wider sunbeam base to a thinner point. I just decreased the width every few stitches as I went along.

Your finished sun will look something like this! I went back in with a needle to clean up loose threads by hand. I waited to trim them until I had threaded them to the back so that the front image had a more polished look.

Repeat the above steps for your devil and angel hearts. There are only a few differences between these and the sun; you'll cut the felt into hearts instead of circles, and to fill in the horns and the wings, I used a straight stitch to give it a colored-in look, reserving the zigzag stitching for the borders.

I know the original dice had "Cruel Summer" lyrics stitched onto these squares, but I ended up leaving them off. It makes the design more minimal and easier to work with.

One thing to note about this step: beware of bunched fabric! Filling in the angel wings brought the edges of the squares in a bit, but I wasn't too upset about it. I think flaws give a craft some personality!

The "Lover" stitching got a little more complicated than the images. I first traced the word with my pen so that I would have some guide as to what the word should look like. Move the stitch width back down to one of the lower settings.

Then instead of just moving the fabric in a circle like I did for the sun, I moved it all around to follow the word I had written in marker. Repeat this a few times until you're satisfied with the thickness. I definitely tried this step a couple different times so don't worry if you don't get it on the first go!

For my final embroidered square, I did a simple "TS," which of course stands for "Taylor Swift."

Before you can sew your squares together, line the edges up and pin them. I used my ruler to mark how far I wanted my hem to go (I did 1/4" at every edge) for a sewing guideline.

I pinned the squares one at a time, checking at each step that they were pinned the right way (especially after I sewed two together incorrectly and had to pick out the stitches. Oops.)

Arrange the images in a similar way to the official dice, or change it up however you'd like! I chose to arrange the squares so that there was a blank in between the images.

Pin and sew your remaining three squares around the middle square so that you end up with a cross.

I continued pinning and sewing the edges to one another until I had an inside-out cube. Here's a tutorial to help you better understand which edges should be sewn together.

I did one square at a time, making sure to focus on the corners and going back in to tighten them up once I was done. You only want one gap, which is where you'll flip the cube inside out and then stuff it.

Once you have a cube, flip the fabric inside out. I used my pen to make sure all the corners and edges were good to go.

Next, stuff your cube with whatever filling you prefer. I didn't stuff it super full because I didn't want it to have a rounded look when I was done.

Ta-da! A little wonky but very cute :)

When you have both dice, cut a small hole in the top for your cord. Knot the ends and stuff them into the holes, then use your needle and thread to attach the cord and the fleece together.

Voilà!

They're soft, fuzzy, and pink. What could be better than that?!

If you don't want to hang these in your car, they also make excellent Valentine's (or Galentine's) decor.

If you need me, I'll be blasting "Cruel Summer" for the rest of the month.

Michelle Randolph teases '1923' season 2 finally gives us answers to the Dutton family tree.

By the end of season 2, Michelle Randolph says "we might be able to fill in some blanks" in the Dutton family tree, which is a very hot topic for internet users! "I had to make my own [family tree] because all of the ones I saw on the internet were like — every single one was different. I was like 'I'm confused.'"

The Dutton family is made up of incredible cast members like Brandon Sklenar, Harrison Ford, and Helen Mirren, and Michelle reveals that the cast are just as close as their characters.

"There's a giant group chat called Giddy Up, which started during cowboy camp of season one," she says. "A cute little name, and I think I mean we all were on location in Montana and all in the same hotel, and we would get dinners after [filming], so I think even though our characters are very different and in different story lines like we all really did bond, which was really helpful to have each other throughout the chaos of of shooting a show."

The actress also says Elizabeth would connect with her 'Landman' character Ainsley.

And if you're a tried and true Taylor Sheridan fan, you've probably picked up on the fact that Michelle isn't just in 1923 — she also has a starring role as Ainsley Norris in Landman! But would Elizabeth and Ainsley get along if they met in an alternate universe?

"That would be a fun thing to witness. I think they would," she says. "They're very different, but the similarities between them is they're both young women who are finding their place in this world and I think that they both actually look at the world through very bright eyes and have a lot of hope, which is an interesting correlation between the two of them. I think Elizabeth has gone through so much more than Ainsley obviously, so there might be a difference there, but I think they would get along."